Ref: Solar Alarm Kit H This
Wireless GSM Alarm System comes supplied with a 30 watt Monocrystal Solar Panel, Charger Regulator, Adjustable Mounting Bracket, 7 A/H Sealed Battery and a WG GSM Wireless Alarm System.
Designed for
Security of Remote Locations with No Mains Power, if activated the system will contact the owners or keyholders by text message & telephone calls (with no hidden monitoring costs).
Ideal for Stables & Holiday Homes.
Kit Includes:1 x GSM Wireless Alarm System.
2 x Wireless PIR's.
2 x Remote Controls.
1 x Siren.
1 x 30 watt Monocrystal Solar Panel.
3 x metres of 2-Core Cable.
1 x Charger Regulator.
1 x 12v 7 A/H Sealed Gel Battery.
1 x Adjustable Mounting Bracket (in windy applications we would recommend an additional mounting bracket or further strengthening structures).
The GSM Wireless Alarm system is very easy to program using the built in keypad and is operated using a selection of methods including using the keypad, remote controls, text message or automatic timing.
Each of the 99 channels can be individually programmed to suit all types of applications including the following options:
1) Instant Alarm.
2) 40 Second Delay.
3) 24 Hour.
4) Bypass.
5) Home Alarm.
6) Away Alarm.
You will need to fit a SIM Card (either contract or pay as you go) with a good network signal at the location of the alarm installation.
The alarm will also send you a text if the power supply is cut or fails and again when it is reinstated.
The 7 x Wired Inputs can be used as both N/O & N/C allowing you to mix and match the type of detectors or triggers with each system.
There are also 2 x 12v DC Outputs when triggered.
Alarm Specification:Size of Panel: 180 (w) x 135 (h) x 26 (d) mm.
Power Supply: 12v DC.
Wireless Channels: 99.
Wired Inputs: 7
Input Type: Volt Free N/O & N/C.
Outputs: 12v DC (3 minutes when activated, can be switch off).
Number of Text Messages it can send: 3
Number of Telephone Numbers it can call: 6.
Personal Message Recording: Yes (10 seconds).
Power Failure Alert: Yes.
Remote Location Function: Yes (Arm, Disarm & Monitor).
Zone Type Options: Yes (Instant-Delay-24 hour-Bypass-Home-Away).
Backup Battery: Yes (NI-HI AAA x 6 7.2v).
Standby Current: 55 m/A.
Alarming Current: 450 m/A.
Accessories Available For This Alarm System:Wireless PIR's (up to 99).
Wireless Door & Window Contacts (up to 99).
Wireless Remote Controls (up to six).
Wireless Panic Buttons (up to 99).
Wireless Pet Tollerant PIR's (up to 99).
Wireless Curtain PIR's (up to 99).
Wireless Keypad).
Wireless Siren.
*Please Note: A maximum of 99 wireless mixed sensors can be used with each system*
Procedure for Receiving Telephone Call:Press 1: Stops Alarm, Stops Calling Out & Left in Arm Mode.
Press 2: Stops Alarm, Stops Calling Out & Left in DisArm Mode.
Press 3: Siren Off & Monitor Location for 30 Seconds (press 3 for further monitoring).
Press 4: 30 Second two-way intercom.
Press *: Status.
How to Remotely Operate:1) Call Telephone Number of the Inserted SIM Card.
2) Enter the 4-Digit User Code of the Alarm Panel.
3) Press 1 = Arm.
4) Press 2 = Disarm.
5) Press 3 = Monitor.
6) Press 4 = 2 way Communication.
Methods of Arming & Disarming:1) Remote Control.
2) Built in Keypad.
3) Sending the alarm a Text Message.
4) Setting the automatic timer.
*Please Note: the user code is different to the program code*
Programmimg Method:1) In disarm state enter the default 4-digit program code & #.
2) Use the keypad to follow instructions for each action.
3) Leave program mode by pressing * & #.
*Please Note: the program code is different to the user code*
Solar Specification & Details:Size: 795 x 370 x 27 mm.
Maintenance Free.
Waterproof/rust/shock/UV-resistant frame.
3 metres of 2-Core Cable (included).
Built-in discharge protection (blocking diodes).
Maximum power 30Wp.
Nominal current: 1.704 A & 17.6V in full sun.
Suitable for all DC 12V applicants
Output power(peak):30W.
Working voltage:17.6V.
Working current:1.704A.
Open voltage:21.6V.
Short circuit current:1.9 A.
Solar controller: 12V,5A
Pattern of the front may vary from model to model.
Charger Regulator Details:Voltage Input: 12v.
Voltage Output: 12v.
Current Input/Output: 5 amps.
Power Input/Output: 60 watts.
Size: 110 x 70 x 27 mm.
Weight: 120 grams.
Battery Specifications:Size: 175 (L) x 70 (W) x 170 (H) mm.
Weight: 6 KG.
Terminal Connection: Srew Thread Bolts.
Voltage: 12v DC.
Rating: 20A/H / 20HR.
Bracket Details:Base Size: 100 x 100 mm.
Base Hole Size: 6.5 mm (can be opened up).
Height: 240 mm.
Width: 360 mm.
Depth: 800 mm.
Weight: 800 grams.
Colour: Black.
Material: Steel.
Connection to Solar Panel: Pre-Drilled Holes.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
