Ref: Auto-Post4 Guarantee your parking area with our 'Battery Powered Remote Control Parking Post', operated from the comfort and warmth of your car, operation time of just 5 seconds.
Very easy & quick to install, no cables, no electric & no electrician required.
Includes 4 x Remote Controls.As there are no cables to run, the system can be installed anywhere, on any surface, simply re-charge the battery every 3 - 6 months. (charger supplied)
Often used to preserve parking at offices, apartments, doctors surgeries, hospitals, in fact any where that you need to stop unauthorized parking.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
A very easy to install 'Battery Powered Automatic Parking Post', operated using Remote Controls, from the comfort and warmth of your car, operation time of just 5 seconds.
There are no cables to run, therefore the system can be installed absolutely anywhere, simply take the battery out every 3 - 6 months to charge (charger supplied)
When the battery is flat, the auto-post will bleep and drop into the down position.
Often used to preserve parking at offices, apartments, doctors surgeries, hospitals, in fact any where that you need to stop unauthorized parking.
You can get a return on your investment in weeks, taking your time and stress into account.
This kit includes 4 x Remote Controls.
Size in the down position:640mm (L) x 160mm (W) x 90mm (H)
Size in the up position:640mm (L) x 160mm (W) x 310mm (High).
Time to Raise: Approx 5 seconds.
Time to Lower: Approx 5 seconds.
Material: Steel:
Colour: Yellow & Black
Battery Usage: Normal Operation (6 - 12 times a day) 3 - 6 months.
Kit Includes:
1 x Battery: 12v
1 x Charger: 12v 800mA
4 x Remote Controls.
1 x Warranty: 1 Year
The trouble with all manual security posts is that if you are just going out for a few minutes, or it is pouring with rain, you do not bother to raise the post, then when you get back someone has stolen your parking bay and its to late.
With our automatic parking post, there is never any reason not to raise the post as you leave, no reason to get back to find no available parking.
When you work out the cost each year to you and your business for you looking for parking spots, the initial moderate investment in this automatic bollard will be paid back time and time again.
Fitting Advice
Concrete & Hard Surfaces:Using the 4 bolts and plugs supplied, drill 4 holes, put the plugs into the holes, bolt the post down, finished.
Approximate time 30 minutes.
Tools Required: drill, drill bit, spanner or socket.
Tarmac, Gravel & Loose Surfaces:Purchase our ground spigot.
Dig a small hole, fit the ground spigot into this hole, back fill with concrete or post mix, let it dry, fit the autopost onto the spigot with the nuts supplied, finished.
Approximate time 1 hour.
Tools Required: Spade for digging a narrow hole about 375mm deep, concrete or post mix, mixing tray for concrete,13mm spanner or socket.
Phone & Postal orders welcome.
