KP GSM Wireless Alarm System

This KP GSM Wireless Alarm system is the most versatile GSM Wireless Alarm that we have seen, Very Easy to Install, Program, Use and Very Affordable.

The system has 16 wireless channels (11 x Alarm & 5 x Emergency channels), 8 Hard Wired channels that can used in a normally open state or normally closed state.

All of the channels can be used in different ways (dependant on programming) ranging from:
Full Alarm (all detectors armed).
Home Alarm (chosen detectors armed).
24 hour Alarm (always armed, normally smoke detectors are used in this mode).
Monitoring Mode (suitable for monitoring elderly patients).
Timed Mode (automatically arms and disarms at set times).
Call mode (panic button activation).

The system can be armed & disarmed by using:
1) Built in Keypad.
2) Remote Control (maximum of 5 per system).
3) Text Message.
4) Automatically Set Time.

The system has fantastic communication including:
1) Text messages when triggered.
2) Call selected telephone numbers when called.
3) Owners can listen into the alarm panel when called.
4) The system can report to the main keyholder after a self check following a selected time span during programming (whilst in armed state).
5) The system can contact the main keyholder by text message when the power supply has failed for 30 minutes and again when the power comes back on again (selectable in the simple programming).
6) Optional Aerial Extension (suitable for locations with a poor mobile phone signal or when the receiver has been installed into a particular type of building, i.e. steel container.
7) Ability to send the system a text which will trigger a seperate output relay for you (perhaps to turn lights on before you get home etc).
8) 4 minute output relay that can trigger any other device including lights when the alarm has been activated.

The system can trigger a strobe siren that plugs into the control panel and a wireless strobe siren that can be located up to 300 metres (line of sight) away, provided it is plugged into a standard plug socket or a 12v DC battery supply.

Another benifit of this system is that you can use the wireless magnetic door, gate, roller shutter
detectors in groups allowing you to have as many of these particular items on any one wireless channel as you ever need, there is NO LIMIT.

If you cant find a wireless detector to suit your needs, then any type of wired alarm detector can be used with the hard wired inputs.

If in doubt, please contact us for Friendly, No Obligation Advice !!.