Ref: TB5-GSMRECEIVEROur GSM Six Channel Receiver works by using a mobile phone sim card for remote locations that have no easy access to a working telephone line, it will send out a text message to up to 3 x pre-programmed numbers in the event of an activation from up to 8 x TB security or smoke detectorsThe receiver will send text messages to up to 3 telephone numbers upon activation, setting & unsetting (if required) or a mains power failure.
This GSM receiver can also call up to 3 telephone numbers when activated which allows the person receiving the telephone call to listen into the exact location of the receiver.
It can be used as a silent alarm or together with a 105 Db siren which is simply plugged into the receiver, it can also send a text message upon setting and un-setting if required or can be programmed to automatically turn on & off at set times or by sending it a text message or using the built in keypad. It has the option for 'Home & Away' arming to allow for different requirements.
Very simple to program and use by using the built in keypad or by sending the system a series of text messages.
Supplied without a sim card as we recommend our customers use a network that has a good mobile phone reception at the location that is to be monitored.
It will work with up to 8 x TB security detectors or smoke detectors and 24 remote controls for easy operation.
Specification:Size: 160 (W) x 110 (L) x 35 (D) mm.
No of Telephone Numbers That Can Be Programmed: Max 3.
Power Supply: Std UK 3 Pin Plug In Power Transformer.
Back Up Battery: PP3.
Exit Time: 30 seconds.
Entry Time: Instant.
Text Message For Alarm: Yes.
Siren Activation: Yes or No.
Built In Siren: No (plug in).
Text Message For Setting: Yes (optional).
Text Message For Un-Setting: Yes (optional).
Automatic Setting or Un-Setting: Yes (optional).
Setting By Sending A Text Message: Yes (optional).
Text Message For Power Failure: Yes.
Text Message For Power Going Back On: Yes.
Text Message Interigation: Yes.
The simple method of setting the system up from new is as follows:
1) Insert Valid Sim Card.
2) Mount or Desk Mount System.
3) Plus in the supplied transformer into a standard UK 13amp wall socket.
4) Turn the On/Off switch on.
5) Program the system using the built in keypad or by sending it a series of text messages (keypad is easiest).
6) Press the learn button on the rear of the receiver until a beep is heard.
7) Activate a chosen detector.
8) Repeat operation 6 & 7 for each detector.
9) Test by setting the alarm and activating.
Optional Extras Available For This System:Wireless Smoke Alarm.
Wireless Internal PIR.
Wireless External Beams.
Wireless Magnetic Door Contact.
Wireless Staff Panic Button.
Wireless Remote Control.
Siren.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
