Ref: WG Gas Sensor This
Wireless Gas Sensor & Transmitter is designed to detect dangerous levels of Gas, LPG & Carbon Monoxide and can be used with all the WG Alarm receivers.
The Gas Sensor is powered by a standard 3-pin 220v AC plug, and needs to be mounted high up in locations that need to be monitored.
Kit Includes:1 x Gas Monitor
1 x 3-pin Plug.
Specification:Transmission Range: 100 metres (line of sight).
Power Supply: 220/110 v AC.
Type of Gas: Natural - Town - LPG - Carbon Monoxide.
Size: 110 (H) x 70 (W) x 40 (D) mm.
Colour: White.
Length of Cable: 1 metre.
Sensitivity: 10% LEL.
As with all safety sensors, please test regularly and use it as a back up safety sensor only, it does not remove the need to follow all standard safety proceedures.Installation Tips:Installation should be according to gas weight.
1) For Natural & City Gas which is a bit lighter than air, the gas detector should be installed under a ceiling close to the gas source.
Do not fit near steam.
Do not position in a location prone to floating air.
Do not position behind curtains or cupboards.
Do not install in wet locations.
We would recommend learning the Sensor into a 24 hour emergency zone on the alarm panel.
Some Tips following Alarm Activation:Shut Gas Off.
Open All Windows & Doors.
Do not turn on Electric Appliances.
Do not use any naked flames.
Find Source of the Activation (only when safe to do so).
Maintenance:Test once per week.
Clean every 6 months (cut power first).
Do not use water or spirits when cleaning.
Phone & Postal orders welcome.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
