Ref: WG-PIR Alarm System This very flexible and affordable
Wireless PIR Alarm System comes with a built in Telephone Dialer, User Keypad, 1 x Remote Controls, 1 x PIR & 1 x Siren and can be used with up to 32 mixed detectors.
A perfect Wireless Alarm for small buildings or as a starter alarm which can be added to in the future.
The Alarm has the following features: 1) You can use up to 32 detectors & remote controls.
2) You can record your own personal message.
3) Battery Back Up.
4) Each Six zones can be independently programmed (choosing Delay, Instant, Home & Away).
5) Built in Keypad.
6) Optional Wireless Keypad.
7) Remote Operation (through telephone call using a standard telephone line).
8) Siren activation upon Telephone Line Failure.
9) Emergency Button.
10) It will contact each programmed telephone number up to 3 times when activated.
Kit Includes:1 x Control Panel with Built in Dialer.
1 x Transformer (standard 3-pin).
1 x Built in Back up Battery.
1 x Remote Control.
1 x Wired Siren.
1 x Wireless PIR.
1 x Telephone Cable.
1 x Manual.
Receiver Specification:Size of Control Panel: 160 (W) x 100 (H) x 30 (D) mm.
Zones: 6.
Squak Feature: Yes (upon Arming & Disarming).
Maximum Number of Detectors: 32.
Programmable Zone Types: Instant - Delay - 24 hour - Home - Away - Temporary Disarmed.
Siren Duration: 0 - 30 minutes (adjustable).
Number of Telephone Numbers Programmable: 6.
Number of Attempts to Telephone Numbers: 3 (or until pressing #)
Record Function: Yes (10 seconds).
Listen in Function: Yes (by ringing in).
All Channels Fully Programmable.
Siren: Wired (plugs into the control panel). 110 Db.
Emergency Button: Yes.
Frequency; 433 MHz.
Power Supply: 3-Pin Transformer 9v DC.
PIR Specification:Size:
110 (H) x 60 (W) x 45 (D) mm (without bracket).
70 mm deep with bracket.
Detection Range:10 metres Distance x 110 Degrees.
Power Suppy: 1 x PP3 Battery.
Battery Life: Approximately 6 - 12 months (normal use).
Mounting the PIR Sensor:The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.
What To Do When the Alarm Calls Keyholders:Press * To Listen In.
Press # To Stop Alarm Calling & Turn Off.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
