Ref: D-A-XL-HOMEKITOur unique4-Channel XL DIY wireless home security system is designed to help protect homes and small businesses from burglars using its unique outdoor PIR's that give an audible warning before they are even at your door, they also alert you to visitors & deliveries. Sorry, temporary out of Stock !!They also double up as an easy to use and install full alarm system allowing you to protect your home & business from burglars, water leaks & hi or low temperature problems.
The system has an impressive 80 metre wireless range which also allows you to protect garages, sheds & outbuildings from theft, water leaks & temperature problems at the same time.
This kit comprises of the following parts: (but you can add any of the XL additional parts to suit your requirements)
1 x Receiver & Power Transformer.
1 x PIR (including battery).
1 x Door & Window Contact.The system is fully wireless with all the detectors battery powered making it an easy to install DIY alarm system, with a full choice of detectors ranging from PIR's, Door & Window Contacts, Water Leakage, High & Low Temperature you can choose the exact quantity and type of detector to suit your individual application.
The receiver is plugged into a standard 13-amp wall socket, and includes an optional battery back up to allow it to work normally throughout power failures, channel identication & low battery warning.
This unique receiver will now allow you to get visual & audible notification when a visitor arrives or an 100 Db siren activation if the alarm has been set & activated. It even allows you to have the alarm and chime set at the same time covering different areas in different ways, a truly versatile system.
Remote Control are available for even easier operation. Specification:
Receiver:Wireless, working range 80 metres.
4 - Channel System.
Up to 4 Detectors can be used on each channel.
3 Alarm & Chime Channels.
1 Dedicated Alert Channel.
Both Alarm & Alert channels can be used together.
2 Alarm Settings (Home & Away)
PIR's ommitted in Home Alarm Mode allowing easy moving around the property.
PIR's in channel 1,2 & 3 can be selected to be chime, bleep, silent or full alarm.
Built in 100 Db Siren.
Powered by 12v transformer included.
The option for 4 x AAA back up batteries (not included).
Mute button, and the ability to temporary bypass a zone.
Free standing or wall mounted.
45 second exit for Away Arming.
30 second entry when in Away Armed Mode.
Instant setting in Home Armed Mode.
4 - digit user keypad.
Low Battery Indicator.
Channel 1, 2 & 3 can be selected for Chime, Bleep or Visual Only when not armed.
Channel 4 is for alert (bleep) mode only.
Operating frequency: 433Mhz.
Size:Receiver 125 (w) x 90 (H) x 30 (D) mm.
PIR 88 (H) x 65 (W) x 40 (D) mm (not including mounting backet)
Contact Switch 75 (H) x 35 (W) x 17 (D) mm.
Magnet 58 (H) x 13 (W) x 9 (D) mm.
PIR powered by a PP3 9v Battery (supplied), which will operate for approximately 1 year.
Magnetic Contact powered by a 3v Lithium Coin Battery.
Detection Area: Up to 13 meters, 110 degees.
Optional Extras:Remote Control.
PIR's.
Door & Window Contacts.
Water Detectors.
Temperature Sensors.
Wireless Siren.
Wirless Emergency Dialers.
Wireless Wall Socket Switches.
Your motion detectors are rainproof however; we strongly recommend using our specially designed rubber hoods for full protection from harsh rain, wind and sun.
Fitting Note:
Motion Sensor should be fitted using the ball joint bracket provided and placed at a height of 4 -5 ft. Then adjust the angle to suit. Set the angle to about 12 degrees from the vertical for maximum detection area and a smaller angle for more precise detection and to avoid unwanted activations.
Batteries required (not included) :
PIR Sensor Unit - 1 x 9v battery
Receiver Unit - Plugs straight into the mains using the adapter which is included however, 4 AAA batteries are required in case of mains failure.
INSTALLATION:
TOOLS REQUIRED: Small Phillips head screwdriver.
MOTION DETECTOR:
Undo the retaining screw & slide off battery cover and install 1 x 9 volt battery. Reinstall cover and screw. The unit requires 45 seconds to re-set itself when the battery is first connected.
Mount detector onto a solid surface, approximately 5-6 feet from the ground. Remember the range of the PIR Sensor is up to 10 meters so it is best to mount the detector so that it has no view of street traffic. This unit should not be mounted so that the sun shines directly onto the lens surface.
1. Plug the Receiver unit into the mains using the provided adaptor. Turn main switch (located on side of unit) to 'OFF' - 'CHIME' or alert.
2. Place the Receiver within range of the motion detector or detectors, remember any walls or obstructions will cut down the range of the radio signal, so for best results place the Receiver and Motion Detector as close in range to each other as possible.
RECEIVER:
In 'OFF' mode the unit will only flash the corresponding red LED without sound.
In 'CHIME' mode the unit will emit a single chime sound (bing-bong) and the corresponding red channel LED will flash for approximately 13 seconds.
In 'ALERT' mode the unit will emit an alert signal in accordance with the channel activated (one beep for Ch1 and two beeps for Ch2 and 3 beeps for Ch3 etc.) and these beeps, together with the corresponding red flashing LED will continue for about 13 seconds.
To stop the alarm you simply key in your own 4 digit code into the Receiver.
Note: Channel 4 will only ever give an 'ALERT' signal no matter if the Receiver is set to ALARM, so bear that in mind when setting the unit up.
If you are not sure what you need, please contact us for friendly, no obligation advice.Phone & Postal orders welcome.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
