Security, Monitoring & Communication Systems by Ultra Secure Direct
Basket
Items:   Value:

WG GSM Auto-Dialer

Visit our Euro Site
WG GSM Auto-Dialer
GSM Mains Power Failure Alarm Receiver & KeypadGSM Mains Power Failure Receiver.WG GSM Mains Power Failure System.Rear View of the WG GSM Mains Power Failure.
Quantity:
£146.39 (£175.67 Including VAT at 20%)
Ref: WG-GSM Dialer

This is a very versatile GSM Auto-Dialer that can be used as a stand alone GSM Dialer or as a GSM Wired & Wireless Alarm System and a GSM Power Failure, it will send up to 3 text messages and call up to 6 telephone numbers (with your personel pre-recorded message) when activated.

This 12v DC powered GSM Auto-Dialer has 7 x Wired Inputs, these inputs can be both N/O & N/C allowing you to mix and match the type of detectors or triggers with each system.

There are also 2 x 12v DC Outputs when triggered.

This professional looking Dialer is very Easy to Program and Use, all you need is to fit a sim card into it (which has a good network signal at the location you intend to locate it).

Kit Includes:
1 x GSM Dialer.
1 x Power Adapter.
1 x Manual.
1 x Remote Control.
1 x Backup Battery.

Specification:
Size of Panel: 180 (w) x 135 (h) x 26 (d) mm.
Power Supply: 12v DC.
Inputs: 7
Input Type: Volt Free N/O & N/C.
Outputs: 12v DC (3 minutes when activated, can be switch off).
Number of Text Messages it can send: 3
Number of Telephone Numbers it can call: 6.
Personal Message Recording: Yes (10 seconds).
Power Failure Alert: Yes.
Remote Location Function: Yes (Arm, Disarm & Monitor).
Option of Wireless Alarm Detectors: Yes (up to 99).
Zone Type Options: Yes (Instant-Delay-24 hour).
Backup Battery: Yes (NI-HI AAA x 6 7.2v.
Standby Current: 55 m/A.
Alarming Current: 450 m/A.

Procedure for Receiving Telephone Call:
Press 1: Stops Alarm, Stops Calling Out & Left in Arm Mode.
Press 2: Stops Alarm, Stops Calling Out & Left in DisArm Mode.
Press 3: Siren Off & Monitor Location for 30 Seconds (press 3 for further monitoring).
Press 4: 30 Second two-way intercom.
Press *: Status.

How to Remotely Operate:
1) Call Telephone Number of the Inserted SIM Card.
2) Enter the 4-Digit User Code of the Alarm Panel.
3) Press 1 = Arm.
4) Press 2 = Disarm.
5) Press 3 = Monitor.
6) Press 4 = 2 way Communication.

The power supply is a 12v DC transformer that plugs into a standard 3 pin wall socket, but you could connect the system directly into a 12v DC supply.

Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!