|
Additional PIR's for the SA3 Plus Systems, to complete the security system to suit your requirements.
You can add as many wirefree sensors as required to your response alarm system:
" Protect a complete room - up to 12 meters PIR coverage
" Automatically detects an intruder when the response alarm is set
" Can be located up to 100 meters from the response alarm receiver(free air space)
" Test mode for easy setup
" Automatic Low Battery Indication
" Built in tamper protection
This system is designed for applications where the cheaper wireless door bell systems just can't work.
A weatherproof external push button is connected to our unique battery operated Dakota Transmitter by cable, which sends a signal back to our Dakota Receiver that is simply plugged into a 13-amp wall socket.
The WR-3000E Receiver plugs in to a standard wall 13-amp socket and can be placed on a table or mounted on the wall. When the receiver gets a signal from a transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 form "C" relays (one for each zone) and one 12 VDC output terminal that will activate for several seconds or 10 minutes when a signal is received. You can connect bells, sirens, telephone diallers, voice microphones to aid security.
You can have as many receivers as you need.
The Wireless Dakota Transmitter UT-3000E is connected to the weatherproof push button by simple bell cable (3 meters supplied as standard) is powered by a 9-volt PP3 Battery. When the button is pressed is sends a signal back to the receiver up to 900 meters away.
It also has built in N/O or N/C contacts, which can be used in conjunction with a massive range of sensors including door switches, motion sensors, water sensors, door mats or any device that needs to be monitored from a distance.
You can have more than one transmitter communicating with an individual or group of receivers.
It has four operating channels to work with, you can mix & match the same as all of our other Dakota Systems, it makes the system truly versatile.
A fully water proof box is supplied for mounting the transmitter.
Supplied with:
Receiver and Plug-in Transformer
Transmitter and a 9-Volt Battery
Weatherproof Mounting Box
Weather Proof Bell Button
3 Meters Of Cable
Size:
Push Button: 85mm (L) x 40mm (W) x 40mm (D)
Weatherproof Transmitter Mounting Box: 100mm (W) x 100mm (L) x 40mm (D)
Receiver: 150mm (W) x 95mm (L) x 27mm (D)
Phone & Postal orders welcome.
<< Previous Page
|
