|
Additional Remote Controls for the SA3 Plus Systems, to complete the security system to suit your requirements.
You can add as many additional Remote Controls to the SA3 Plus as you need.
This system is designed for applications where the cheaper wireless door bell systems just can't work.
A weatherproof external push button is connected to our unique battery operated Dakota Transmitter by cable, which sends a signal back to our Dakota Receiver that is simply plugged into a 13-amp wall socket.
The WR-3000E Receiver plugs in to a standard wall 13-amp socket and can be placed on a table or mounted on the wall. When the receiver gets a signal from a transmitter one of 4 different tones (Classical, Westminster Chime, Ding Dong, Whistle) will sound for a few seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 form "C" relays (one for each zone) and one 12 VDC output terminal that will activate for several seconds or 10 minutes when a signal is received. You can connect bells, sirens, telephone diallers, voice microphones to aid security.
You can have as many receivers as you need.
The Wireless Dakota Transmitter UT-3000E is connected to the weatherproof push button by simple bell cable (3 meters supplied as standard) is powered by a 9-volt PP3 Battery. When the button is pressed is sends a signal back to the receiver up to 900 meters away.
It also has built in N/O or N/C contacts, which can be used in conjunction with a massive range of sensors including door switches, motion sensors, water sensors, door mats or any device that needs to be monitored from a distance.
You can have more than one transmitter communicating with an individual or group of receivers.
It has four operating channels to work with, you can mix & match the same as all of our other Dakota Systems, it makes the system truly versatile.
A fully water proof box is supplied for mounting the transmitter.
Supplied with:
Receiver and Plug-in Transformer
Transmitter and a 9-Volt Battery
Weatherproof Mounting Box
Weather Proof Bell Button
3 Meters Of Cable
Size:
Push Button: 85mm (L) x 40mm (W) x 40mm (D)
Weatherproof Transmitter Mounting Box: 100mm (W) x 100mm (L) x 40mm (D)
Receiver: 150mm (W) x 95mm (L) x 27mm (D)
Phone & Postal orders welcome.
<< Previous Page
|
