Ref: Wireless Siren(Bell) This is a very usefull
Wireless Strobe & Siren which has a 110 Db Siren & Flashing Strobe Light that can be used with our
Long Range Wireless Bell & Entrance Systems, it is powered by a plug in transformer but triggered by a wireless signal from the standard WR-3000E Receiver with a range of 300 metres (line of sight) and when activated will activate for either 6 seconds or 10 minutes (in standard set up) or can be used with a timer relay for different durations.
A good accessory for our customers who are not alway within hearing range of the wireless receiver and want a Siren activating on a different building, a small transmitter board is connected to the wireless receiver by 3 metres of bell cable, some customers will utilize a two way switch on this bell cable which allows the siren to be turned on and off to suit different times of the day.
Kit Includes:1 x External Siren & Strobe.
1 x 12v DC Transformer.
1 x 3 metres Bell Cable.
1 x Wireless Transmitter.
1 x Back Up Battery.
1 x Tamper Switch.
If you require more than one channel to be activated on the wireless receiver you would need to power the Siren by a seperate power supply (which we can provide).
Siren Specification:Size of Siren: 195 (H) x 110 (W) x 70 (D) mm.
Power Supply: 12v 1amp Transformer (supplied).
Back Up Battery: Yes (built in, 6v 600Ma).
Siren: Yes (110 Db).
Strobe: Yes (when activated).
Tamper Switch: Yes (rear mounted).
External Power Failure warning: Yes (flashing light every 2 seconds & 3 minute siren activation).
Wireless Range between the Siren & Transmitter: 300 metres (line of sight).
Transmitter Specification:Size: 65 (H) x 38 (W) x 13 (D) mm. (not including the extendible aerial).
Aerial Size: up to 65 mm.
Power Requirements: 12v DC.
Phone & Postal orders welcome.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
