Ref: WG-GSM Emerg-Alarm This
GSM Emergency Wireless Alarm System will contact key holders via text message and telephone when activated for Security or Medical reasons by the Wireless Panic Buttons or Remote Control.
This Emergency Call System can use up to an impressive 99 Wireless Panic Buttons (or alarm detectors) and when activated will send up to 3 text messages & 6 telephone calls with your own pre-recorded message.
The system is very easy to program using the built in keypad.
Each of the 99 channels can be individually programmed to suit all types of applications including the following options:
1) Instant Alarm.
2) 40 Second Delay.
3) 24 Hour.
4) Bypass.
5) Home Alarm.
6) Away Alarm.
You will need to fit a SIM Card (either contract or pay as you go) with a good network signal at the location of the alarm installation.
The alarm will also send you a text if the power supply is cut or fails and again when it is reinstated.
The 7 x Wired Inputs can be used as both N/O & N/C allowing you to use other devices if required.
There are also 2 x 12v DC Outputs when triggered.
Kit Includes:1 x GSM Dialer.
1 x Power Adapter.
1 x Wired Siren.
1 x Wireless Panic Button.
1 x Wireless Wristband Panic Button.
1 x Manual.
1 x Remote Control.
1 x Backup Battery.
Alarm Specification:Size of Panel: 180 (w) x 135 (h) x 26 (d) mm.
Power Supply: 12v DC.
Wireless Channels: 99.
Wired Inputs: 7
Input Type: Volt Free N/O & N/C.
Outputs: 12v DC (3 minutes when activated, can be switch off).
Number of Text Messages it can send: 3
Number of Telephone Numbers it can call: 6.
Personal Message Recording: Yes (10 seconds).
Power Failure Alert: Yes.
Remote Location Function: Yes (Arm, Disarm & Monitor).
Zone Type Options: Yes (Instant-Delay-24 hour-Bypass-Home-Away).
Backup Battery: Yes (NI-HI AAA x 6 7.2v).
Standby Current: 55 m/A.
Alarming Current: 450 m/A.
Wristband Specification:Size of button: 40 (L x 30 (w) x 12 (d) mm.
Power: 3 x Lithium Coin CR16 20 Batteries.
Wireless Transmission Range: 100 metres (line of sight).
Panic Button Specification:Size: 40 (w) x 70 (w) x 17 (d) mm.
Power: 12v Battery (MN21)
Wireless Transmission Range: 100 metres (line of sight).
Remote Control Specification:Size:52 (L) x 28 (W) x 10 (D) mm.
Battery Life: 1 - 3 years (normal use).
Battery Type: 12v MN27.
Transmission Distance: 60 metres (line of sight).
Accessories Available For This System:Wireless PIR's (up to 99).
Wireless Door & Window Contacts (up to 99).
Wireless Remote Controls (up to six).
Wireless Panic Buttons (up to 99).
Wireless Pet Tollerant PIR's (up to 99).
Wireless Curtain PIR's (up to 99).
Wireless Keypad).
Wireless Siren.
*Please Note: A maximum of 99 wireless mixed sensors can be used with each system*
Procedure for Receiving Telephone Call:Press 1: Stops Alarm, Stops Calling Out & Left in Arm Mode.
Press 2: Stops Alarm, Stops Calling Out & Left in DisArm Mode.
Press 3: Siren Off & Monitor Location for 30 Seconds (press 3 for further monitoring).
Press 4: 30 Second two-way intercom.
Press *: Status.
How to Remotely Operate:1) Call Telephone Number of the Inserted SIM Card.
2) Enter the 4-Digit User Code of the Alarm Panel.
3) Press 1 = Arm.
4) Press 2 = Disarm.
5) Press 3 = Monitor.
6) Press 4 = 2 way Communication.
Methods of Arming & Disarming:1) Remote Control.
2) Built in Keypad.
3) Sending the alarm a Text Message.
4) Setting the automatic timer.
*Please Note: the user code is different to the program code*
Programmimg Method:1) In disarm state enter the default 4-digit program code & #.
2) Use the keypad to follow instructions for each action.
3) Leave program mode by pressing * & #.
*Please Note: the program code is different to the user code*
The power supply is a 12v DC transformer that plugs into a standard 3 pin wall socket, but you could connect the system directly into a 12v DC supply.
Find this model advertised for the UK at any reputable internet dealer for less... and we will beat that price!
