Professional Water Bug 200E Water Alarm

Water Bug 200E includes:

• 200 Waterbug Controller.
• Quality Water Sensor (no false alarms from condensation or high humidity).
• Designed as a Intermediary for the Water Sensor & other Alarm Panels.
• N/O & N/C Output Relay.
• Can be Expanded (up to 6 Waterbug Sensors).

This Water Alarm is often used by professionals who need to add a Water Sensor to existing Alarm Panels.

The Waterbug 200 Controller requires 12 - 24v DC supply and has a Form C N/O (normally open) & N/C (normally closed) Output Relay which would be used to connect to many types of Alarm Panels (there are no built in alarms or buzzers).

The Waterbug Sensor is connected to the Controller by simple 2-core cable (which can be extended up to 30 metres), it is possible to also add a further 5 Water Sensors if required.

You can use up to 6 x Water sensor with each control panel (surface or under carpet), the sensors can have the cables increased up to 30 metres.

The sensor will not alarm due to condensation or high humidity. 

It is also possible to add very thin Sensors designed to be fitted underneath carpets, Click Here to View.

• 1 x Water Bug 200E Control Panel.
• 1 x Surface Mounting Water Sensor.

• Size of Control Panel: 80 x 70 x 30 mm.
• Size of Water Detector: 80 x 55 x 17 mm.
• Length of Cable: 3 metres (can be extended).
• Power: 12 or 24v DC (not supplied).
• Output: N/O & N/C Dry Relay.