30 metre KP Water Detecting Rope with Control Panel

30 metre KP Water Detecting Rope & Control Panel (008-0450)

008-0450

New

KP Professional Water Detecting Rope System which includes a 30 metre Water Detecting Rope and an adjustable Control Panel which will latch a N/O connection to N/C whilst any water is being detected.

More details

Please Note: Currently Only One in Stock !!

£ 582.70

(including vat)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

KP Professional Water Detecting Rope System which includes a 30 metre Water Detecting Rope and an adjustable Control Panel which will latch a N/O connection to N/C whilst any water is being detected.

The 30 metre length Active Detecting Rope is laid across a vulnerable location (floor or ceiling) allowing you to monitor larger areas than using a single probe, it is also supplied with an additional 2 metres of non active cable going back to the control panel. 

The Control Panel is powered by a 3-pin Plug in Transformer (although direct power from an existing control panel could be used) and has a Normally Open Volt Free Output, when water is detected this N/O Output Relay will close for the duration that water is being detected.

This Output Relay can be used to activate Buzzers, Sirens, Flashing Lights or Telephone Diallers.

For smaller areas we can offer 2 & 10 metre Water Detecting Ropes.

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Water Detecting Rope Control Panel.
  • 1 x 3-pin Plug in Transformer (2-pin available upon request).
  • 1 x 30 metre Water Detecting Rope.
  • 31 x Self Adhesive Clips (for rope).

Control Panel:

  • Voltage Input: 12 - 60v DV.
  • Output: N/O going N/C (for duration whilst the detecting rope is damp).
  • Size: 110 (L) x 37 (W) x 50 (D) mm.
  • Adjustable Sensitivity: Yes (4 settings).
  • Mounting Methods: Din Rail or Double Sided Tape.

Rope: 

  • Connection Method to Control Panel: 2 x terminal screw connections.
  • Length of Active Water Detecting Rope: 30 metres.
  • Diameter of Rope: 10 x 5 mm.
  • Length of Non Water Detecting Cable: 2 metres.
  • Method to mount Rope: 31 x Self Adhesive Clips.