Smart Alarm Outdoor PIR

Outdoor PIR for the Wireless Smart Alarms.

Ultra Secure

005-3800

New

Outdoor Wireless PIR for use with the complete range of Smart Wireless Alarms, supplied with a protective rubber hood which results in a tighter detection pattern helping it avoid false alarms from small animals. 

More details

£ 41.95

(including vat)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

Additional weatherproof Outdoor (external) Wireless PIR for use with the complete range of Smart Wireless Alarm Systems.

It is supplied with a unique Protective Rubber Hood which results in a narrow detection pattern (ideal for external applications avoiding false alarms from Cats & Foxes when mounted low and in the horizontal position). The front aperture can easily be widened (by using a knife or scissors) should you want a wider detection area.

It has a detection range of 10 - 15 metres and transmission distance back to any of the control panels of 150 metres (line of sight).

There are two ways to fit this PIR:

  • Approximately 1 - 1.5 metre High (hidden away) in the horizontal position.
  • High up looking towards the ground (experimenting with the angle so that the PIR doesn't detect small ground animals).


There is a built in 3 minute power saving delay (following each activation), but this can be changed to 15 seconds for applications more worried about a time delay than battery life, powered by a single PP3 battery.

The battery will operate for between 6 - 12 months in most applications (depending on number of activations) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for timely battery replacement.

There is no limit to how many additional PIR's can be added to our range of Smart Wireless Alarms.

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x External Wireless PIR.
  • 1 x Protective Rubber Hood.
  • 1 x Mounting Bracket.
  • 1 x PP3 Battery.
  • 1 x Set of Screws.
  • Frequency: 868 Mhz.
  • Detection Distance: 10 - 15 metres.
  • External Use: Yes.
  • Detection Angle: Approximately 20 Degrees (with hood) 110 Degrees (without hood).
  • Power Supply: 1 x PP3 Battery.
  • Transmission Range: 150 metres (line of sight).
  • Mounting Method: Adjustable Wall Bracket (using 2 screws).
  • Power Saving: Yes (if set to 3 minutes between activations).
  • Low Battery Warning: Yes (low flashing red LED when the battery is needing replacement).