New 'The UltraDIAL' 3G GSM Alarm with Wireless BT PIR & Vibration Door Window Sensor

The 'UltraDIAL' Battery 3G GSM Alarm with a Wireless BT PIR & Vibration Door Window Contact

Ultra Secure

007-2580

New

Battery 3G GSM UltraDIAL supplied with a unique Wireless Vibration & Door/Window Sensor & BT PIR, the Alarm contacts key-holders by Telephone (with your own pre-recorded message) & Text Message when activated. The Vibration Sensor & PIR have a built in 130 Decibel Siren, many more Wireless accessories can be added if required. 

More details

£ 179.95

(including vat)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

The 'UltraDIAL' battery powered Covert 3G GSM Alarm supplied with:

  • 1 x Unique Wireless Vibration Door/Window Contact (which includes an optional Siren, adjustable Vibration settings, Door Window Contact & Keypad).
  • 1 x Wireless BT PIR (which has a built in Siren).
  • 2 x Remote Controls (used to Arm & Disarm the complete Alarm from up to 40 - 50 metres away).

How it Works:

All three devices are connected within their own unique Wireless Network

UltraDIAL Alarm

They are all Armed & Disarmed at the same time using the Remote Controls supplied.

Remote Control

The Wireless BT PIR is powered by 3 x AA Batteries and has a built in 130 Decibel Siren (which cannot be used used in silent mode).

BT PIR

The Vibration & Magnetic Contact can be used with Vibration ON or OFF & the Magnetic Contact operation ON or OFF (fully adjustable to suit your application).

Vibration Door Window Contact

When used with Vibration ON, it can be mounted in a position on a Door or Window that will detect a violent attack without detecting normal movement caused by Wind or Traffic (the sensitivity can be adjusted to help).

When using the Contact as a Magnetic Contact (detects doors & windows being opened) it would be fitted onto a Door or Window with the Magnet being fitted onto the frame (in a position that both parts are nearly touching when the Door or Window is closed).

The Vibration Contact has an optional built in 130 Decibel Siren (which can be turned OFF). 

Activation:

If the BT PIR or Vibration Magnetic Contact are triggered, they will Wirelessly trigger the UltraDIAL Alarm (which ideally would be hidden out of sight) together with activating all Sirens that have been programmed to be ON.

The UltraDIAL will then contact up to three key-holders by Telephone & SMS.

Many additional Sensors & Sirens can can be added to this Alarm (no limit), check the accessory tab on this page.

The secret of using this Alarm is to hide (or lock) away the UltraDIAL in a location where an Intruder wouldn't even know it is there, this is very easy due to the fact it is battery powered and wireless.

This simple Alarm is ideal for so many applications, examples are:

  • Workshop, Shed & Garage.
  • Caravan, Static Home or Motor Home.
  • Boat.
  • Fuel Tank Hinged Door.
  • New Builds, Renovations & Vacant Homes.
  • Rental or Temporary Homes.
  • The list is endless !!

UltraDIAL

Additional Sensors:

There are many additional Sensors & Sirens that can be added, these include:

  • Wireless Door Contacts (007-0260) or (007-0630).
  • Standard PIR (007-0200).
  • Standard PIR with Hood (007-1410).
  • UltraPIR set to Silent and not using the SIM Card function (007-1150).
  • UltraPIR with Hood set to Silent and not using the SIM Card function (007-1400).
  • Additional Vibration Sensor (007-1460).
  • Indoor Battery Siren (007-0230).
  • Outdoor Solar or Battery Siren & Strobe (007-0221).

Additional Buildings:

The Alarm has a wireless operating range of 100 metres (line of sight) between the accessories and the UltraDIAL equates to around 40 - 50 metres in many applications, which allows various buildings to be protected at the same time, many customers will cover two, three or even four buildings with this Alarm. 

Arming & Disarming:

The Alarms are Armed & Disarmed by using the Remote Control (supplied) from up to 40 - 50 metres away, up to 9 Remote Controls can be used with each Alarm. 
If the UltraDIAL Alarm is powered by the external 5v power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, and quicker when powered by a plug in transformer or usb cable (this can vary depending on the mobile phone networks at the time).  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Power Supply:

The UltraDIAL Alarm is powered by 3 x Lithium AA Batteries (supplied) which will last around 6 months in most applications, it can also be powered by a 5v Plug in Transformer or USB Cable where a power supply is available. If the power supply is used, the batteries can be kept in the Alarm as a backup although they will not be charged by the device.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

  • Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
  • Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
  • Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Receiving a Call from UltraDIAL

Wireless Vibration & Magnetic Door or Window Contact:

It has a host of features including:

  • Optional Vibration Sensor (with adjustable sensitivity settings).
  • Optional Magnetic Contact operation.
  • Built in Keypad (can be used to Arm & Disarm).
  • Can be Armed & Disarmed by the Remote Controls in the kits.
  • Optional built in 130 decibel Siren (can be turned off) operates for 30 seconds.
  • Optional Door left Open 'Beep' mode (whilst in disarm mode). 
  • Optional Door left Open 'Alarm' mode (whilst in Armed state).
  • Easy to Fit Magnet.
  • It can also be used as a stand-alone Alarm.

You can choose to use the device with Vibration Only, Magnetic Contact Only or with both Enabled.

When used as a Magnetic Contact on a Window or Door, one part would be fitted onto the Door/Window and the other part onto the Frame (in such a position that when closed both parts are nearly touching).

Siren:

The Contact has a built in optional Loud Siren to help deter an Intruder.

Optional Siren


Keypad:

The device has a small keypad that is used to carry out the choice of commands to suit your application together with being able to Arm & Disarm the complete Alarm system in the event you have forgot to carry the relevant Remote Control.

Keypad

BT PIR:

BT PIR

The BT PIR has a built in 130 Decibel Siren (which cannot be used in silent mode) and will sound for 60 seconds when activated, but still remain fully armed (so will trigger again if the intruder is still present or re-enters the building.

The Alarm system has a 30 second exit delay (plenty of time to leave the building and lock up) and a 5 second entry delay (normally disarmed from outside the building before entering).

The PIR has a 8 metre distance, 120 degrees horizontal & 90 degrees vertical detection pattern.

It has a low battery warning LED, when the batteries are low the LED will remain ON.

Powered by 3 x standard AA batteries (supplied). 

Wired Alarm Detectors:

The UltraDIAL also has one set of momentary volt free Inputs, 1 x N/O or N/C, these can be used with many types of devices, examples listed below:

Normally Open going Closed:

  • Water & Flood Sensors.
  • Alarm Panel.
  • Perimeter Beam.
  • Pressure Mat.
  • Tilt Switch.

Normally Closed going Open:

  • Door Contact.
  • Gate Contact.
  • Alarm Panel.
  • Pressure Mat.
  • Tilt Switch.

UltraDIAL Input Relays

Easy Programming:

The UltraDIAL is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

UltraDIAL

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66, so can be used in most locations, it is not however designed to be submerged.

Low Battery:

The UltraDIAL Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Mains Power Failure:

When the Alarm is being powered by an external 5v power supply, it will send the primary key-holder a SMS (text message) in the event of a Power Cut together with another when the power comes back on (provided you also have batteries fitted).  

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

Security Screws UltraDIAL

Covert Branding:

Due to the fact that we believe this Alarm should be used as a Covert Alarm and hidden safely away from sight and reach whenever possible, we have kept the branding low key. 

Covert Branding UltraDIAL

SIM Cards:

The Alarm uses a standard size SIM Card (PAYG or Contract), No Data is required.

SIM Card Holder

This is a very versatile Security device ideal for many applications designed by Ultra Secure Direct.

If you need advice, please Contact Us !!

Need Advice on choosing the best System for your personal application or Help after you have Purchased one, then please contact

us by:

Telephone: We are still available in the old fashioned way, give us a call on 01604 589414 or 01604 758438 to talk to a real person, we are happy to give you Friendly, No Obligation advice (lines open 8am to 5.30pm Monday - Thursday, 8am to 5pm Friday).

Email: If you don't have time to call us, then send us an email to info@ultrasecuredirect.com
 

Personal Visit: Some customers find it far easier to come and meet us for a Friendly, No Obligation Consultation (click here for full details).

  • 1 x UltraDIAL GSM Alarm.
  • 1 x BT PIR.
  • 2 x Remote Controls.
  • 3 x Lithium AA Batteries.
  • 3 x AA Alkaline Batteries.
  • 1 x Manual.
  • 1 x Tool.
  • 1 x Wireless Vibration & Magnetic Contact.
  • 1 x Magnet.
  • 1 x Set of Double Sided Tape.
  • 2 x Screws.
  • 1 x CR2 Lithium Battery.

UltraDIAL:

  • Battery Power: 3 x Lithium AA Batteries (supplied).
  • Battery Life: 6 months in most applications).
  • Main Power: Yes (optional 5v DC plug in transformer).
  • Programming Method: Easy Built in Keypad.
  • Wireless Transmission Range: 100 metres.
  • Size: 160 (L) x 82 (W) x 42 (D) mm.
  • Colour: Black.
  • Wired Inputs: Yes (1 x Volt Free N/O or N/C).
  • Cable Entry: 2 x Glands.
  • Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
  • Wireless Outputs: Yes (Internal & External Sirens, PIR's).
  • GSM: Yes (3G).
  • SIM Card Required: Yes (standard size).
  • Calls Key-holders: Yes (maximum of three, which can be turned off).
  • Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
  • Built in Siren: No (designed as a covert alarm).
  • Mounting Method: 2 x Screw Holes in Flange.
  • Weatherproof: Yes (IP66).
  • Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
  • Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
  • Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
  • Power Failure Notification: Yes (when used with a plug in transformer).
  • Weekly Status Report: Yes (can be turned off).
  • Low Battery Notification: Yes (to primary key-holder).
  • Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).

Vibration Contact Sensor:

  • Wireless Operation with UltraDIAL Alarms: Yes.
  • Wireless Operation with BT PIR Alarms: Yes.
  • Wireless Range: 100 metres (line of sight).
  • Internal Siren: Yes 130 Decibel (optional, can be turned ON or OFF).
  • Vibration Sensor: Yes (optional). 
  • Magnetic Contact: Yes (optional).
  • Vibration Sensitivity Adjustment: Yes (low, medium & high).
  • Duration of Siren: 30 seconds. 
  • Keypad Code Change: Yes (cannot start with 3).
  • Keypad To Arm: Yes (press 3). 
  • Keypad To Disarm: Yes (code + 3).
  • Exit Delay: 20 seconds.
  • Entry Delay: 5 seconds.
  • Change Code Option: Yes.
  • Size of Contact: 60 (H) x 40 (W) x 15 (D) mm.
  • Size of Magnet: 45 (H) x 13 (W) x 13 D) mm.
  • Power Supply: Battery (1 x 3v Lithium CR2 Battery).  
  • Colour: White.
  • Open Door Beep: Yes Optional (when disarmed).
  • Open Door Siren: Yes Optional (when armed).
  • Test Mode: Yes (beep on open & close with 30 second reset.
  • Stand-alone Operation: Yes.
  • Frequency to Wireless Sirens 868 Mhz.

BT PIR:

  • Alarm Detection Type: PIR (passive infrared detector).
  • Arming & Disarming Method: Remote Control.
  • Working Distance between PIR & Remote Control: 50 metres (line of sight).
  • Transmission Distance to additional Wireless Sirens: 50 metres (line of sight).
  • Built in Siren: Yes (130 decibels).
  • Exit Delay: Yes (30 seconds).
  • Entry Delay: Yes (5 seconds).
  • Siren Duration: 60 seconds (remains fully armed, until disarmed by remote control).
  • Detection Range: 8 metres.
  • Detection Horizontal Coverage: 120 Degrees.
  • Detection Vertical Detection: 90 Degrees.
  • PIR Power Supply: 3 x AA Batteries (supplied).
  • Remote Control Power Supply: 1 x 3v Lithium Coin Battery.
  • Size of PIR: 68 (W) x 108 (H) x 36 (D) mm.
  • Size of Remote Control: 75 (H) x 45 (W) x 12 (D) mm.
  • PIR Battery Life: 12 - 18 months (normal use).
  • Warranty: 1 Year.