Wireless Smart Alarm & Telephone Dialer & External Gate Contact

External Contact (gate, door or window) & Smart Wireless Alarm with Built in Telephone Dialler

Ultra Secure

005-3150

New

Impressive 8 Channel Smart Wireless Alarm Control Panel with Built in Telephone Dialler supplied with a unique External Gate/Door Contact, can be used as a small Alarm System or as a base to build a system to suit your exact requirements. It will contact up to 8 key-holders by Telephone if activated, operates on 868 Mhz.

 

More details

Sorry, Out of Stock !!

£ 104.98

(including vat)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

8 Channel Smart Wireless Alarm Control Panel with Built in Telephone Dialler supplied with a unique External Gate/Door Contact, can be used as:

  • A Wireless Gate Alarm & Telephone Dialler System.
  • A Wireless Gate or External Door Chime Alert & Alarm Dialler (to suit different times of the day).
  • Or as a base to build a far more comprehensive Wireless Alarm System to suit your exact requirements.

This Alarm would be connected to one of your telephone line extensions (most customers would simple use a plug in splitter) therefore there are no hidden running costs apart from the cost of a call should the alarm make one. It will contact up to 8 key-holders with your own pre-recorded message in the event of an Alarm activation.

Upon receiving a call you can carry out the following actions:  

  • Listen to the pre-recorded message.
  • Press # (within 10 seconds of the end of the message).
    • Press 1 to listen into the location of the alarm panel.
    • Press 3 to speak through the Alarm Panel.
    • Press # 1 or # 3 to toggle between the listen in & talk features.
    • Press # # to stop the alarm calling other keyholders.
When ## is pressed, the Alarm will turn OFF, but remain fully Armed !!. 

At the same time the 130 Decibel Siren on the control panel has been triggered to hopefully scare off the Intruder.  

The External Magnetic Contact is designed to be used on Gates, Doors & Windows, the battery powered magnetic contact would be fitted to either the gate/door/window or frame by using the supplied double sided tape & screws (for external locations), the magnet would be fitted onto the opposing post, door, or window frame (using double sided tape & 2 small screws, supplied). They would be fitted so that when the gate/door/window is closed, the two parts would be within 5 mm from each other, when opened a wireless signal is transmitted up to 200 metres (line of sight) back to the Control Panel. 

There is no limit to how many extra Gate Contacts (or other detectors) that can be added to this system.

The impressive Control Panel has all the features you would expect from a far more expensive Alarm System whilst remaining easy to use and program, ideal for DIY Installations, these include:

  • Built in 130 Decibel Siren (adjustable duration).
  • Back up Battery.
  • User Keypad (used for simple programming and daily operation).
  • Stylish Back Light (very useful coming into a dark room).
  • Adjustable Exit & Entry Durations.
  • Two way Communication for the person being called.
  • 8 Wireless Channels (no limit to the number of alarm detectors that can be used).
  • Can be also used with Remote Controls & Battery Powered Wireless Keypad (up to 99 remote controls can be used).
  • Built in Chime Alert (on any of the 8 wireless channels, easily by turned ON & OFF to suit different times of the day).
  • Pre-record your own personal 20 second message.
  • The Alarm panel can call up to eight key-holders, between 1 & 9 times following an activation.
  • Options for operation are Fully Armed, Home Armed, Alert Mode & OFF. 
  • Built in Low Battery Warning.
 
The Smart Alarm Panel is powered by a plug in 3-pin plug in transformer (no electrician required) and plugs into a telephone extension socket with the cables supplied. 
 
This Smart Wireless Alarm is easy to Program (using built in keypad), easy to Install, and can be operated using Remote Controls, Battery Powered Wireless Keypad or the built in Keypad in the following ways:
  • Full Arm (arms all detectors).
  • Home Arm (arms a selection of detectors, this would normally be perimeter detectors on windows, inside garages etc, designed to be used whilst the owner is still at home).
  • Chime Mode (ideal to be alerted if a front/back door, or gate is opened whilst the alarm is disarmed, this can be easily turned ON/OFF using a remote control or keypads to suit different times of the day).
  • Panic Alarm (this can be activated using the remote controls or keypads, perfect for Security or Medical emergencies).
  • Duress Disarm (in the rare event of being forced to turn the alarm OFF, a secret code can silence the alarm whilst it is still calling key-holders with your own pre-recorded message). 
  • Disarm.

A wide selection of Alarm Accessories can be added to this system including:

  • Internal & External Magnetic Door/Window Contacts (no limit).
  • Internal & External PIR's (no limit).
  • Remote Controls & Battery Powered Wireless Keypads (a maximum of 99).
  • Battery Powered Wireless Sirens (no limit).
  • Dummy Sirens (no limit).
  • Wireless Vibration Sensors (no limit).
  • Wireless Pressure Mats (no limit).
  • Wireless Water Detectors (no limit).
  • Wireless Smoke Alarm Siren Monitors (no limits).

An ideal DIY Alarm System which will do everything that is needed from most Alarm Systems without having to pay for an expensive Installation & Service Contract.

If you need help in building a system to suit your exact requirements, please contact us for Friendly, No Obligation Advice !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Wireless Smart Alarm Control Panel & Built in Telephone Dialer.
  • 1 x 3-pin Plug in Alarm Control Panel Transformer (2-pin available upon request).
  • 1 x Telephone Cable.
  • 1 x PP3 Battery (for the alarm panel).
  • 1 x External Magnetic Contact.
  • 1 x Magnet.
  • 1 x set of mounting screws.
  • 1 x mounting double sided tape.
  • 2 x AAA batteries.
  • 1 x Manual.

Wireless Alarm Receiver & Telephone Dialler:

  • 8 Channels (no limit to number of alarm detectors can be used on each channel).
  • Can be used with up to 99 Remote Controls & Wireless Keypads.
  • Will contact up to 8 key-holders (between 1 & 9 times, chosen during programming).
  • Message in self-recorded (up to 20 seconds). 
  • Backlight (engages as you press any button).
  • Built in 130 Decibel Siren (duration adjustable between 1 - 6 minutes).
  • Adjustable Exit Delay (10 - 60 seconds).
  • Adjustable Entry Delay (10 - 60 seconds).
  • Low Battery Warning (visual battery guage for the back up battery when power is OFF).
  • Built in Panic Function (can be triggered using Built in Keypad, Remote Control & Wireless Keypad).
  • Duress Function (allows key-holder to turn the alarm partially OFF, telephone dialer remains active).
  • Receiving Telephone can toggle between Listen In & Talk function.  
  • Size of Panel: 190 (w) x 114 (h) x 35 (d) mm.
  • Power Supply: Plug in 3-pin Transformer (2-pin available upon request).
Wireless External Gate/Door/Window Magnetic Contact:
  • Frequency: 868 Mhz.
  • Wireless Transmission Distance: 200 metres (line of sight).
  • Power: 2 x AAA batteries (supplied).
  • Distance required in the closed position: 0 - 5mm.
  • Mounting Method: Screws or Double Sided Tape (supplied).
  • Size of Magnetic Contact: 85 x 40 x 15 mm.
  • Size of Magnet; 53 x 14 x 15 mm.
  • Side of Operation of Switch: Both Sides.
  • Battery Life: 1 - 2 years (normal operation, depending on usage).
  • Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).