Sale! Pet Friendly DIY Wireless Smart Alarm & Telephone Dialer System.

Pet Friendly Delux Smart Wireless Alarm & Built in Telephone Dialler System.

Ultra Secure

005-3200

New

Pet Friendly Wireless Smart Alarm with a Built in Telephone Dialler, supplied with 8 x Door Contacts, 2 x Remote Controls, 1 x Wireless Siren & 1 x matching Dummy Siren, the safest way to Alarm premises with Pets present. The Alarm will contact Key-holders by Telephone when activated (please note: only 2 available !!).

More details

£ 278.81

(including vat)

£ 309.79

-10%

Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

Pet Friendly Wireless Smart Alarm with a Built in Telephone Dialler, supplied with 8 x Door Contacts, 2 x Remote Controls, 1 x Wireless Siren & 1 x matching Dummy Siren, the safest way to Alarm premises with Pets present. The Alarm will contact Key-holders by Telephone if triggered.

If you have Pets running around your premises, it is always a risk using Pet Friendly PIR's, you may have two small dogs that when excited will run around the house creating far more heat than a small agile burglar, if a Pet Friendly PIR didn't pick up this activity then it wouldn't pick up the small Intruder.

Far safer to fit magnetic contacts to all the risk Doors & Windows, this kit is supplied with eight, but additional ones can be added (there is not limit).

It Operates on 868 Mhz which is favoured by some customers.

This Alarm Control Panel would be connected to one of your telephone line extensions (most customers would simple use a plug in splitter) therefore there are no hidden running costs apart from the cost of a call should the alarm make one. It will contact up to 8 key-holders with your own pre-recorded message in the event of an Alarm activation.

Upon receiving a call you can carry out the following actions:  

  • Listen to the pre-recorded message.
  • Press # (within 10 seconds of the end of the message).
    • Press 1 to listen into the location of the alarm panel.
    • Press 3 to speak through the Alarm Panel.
    • Press # 1 or # 3 to toggle between the listen in & talk features.
    • Press # # to stop the alarm calling other key-holders.
When ## is pressed, the Alarm will turn OFF, but remain fully Armed !!. 

At the same time the Internal & External Sirens would be triggered to hopefully warn off the Intruder. 

The Internal Magnetic Contacts are designed to be used on Doors & Windows, the battery powered magnetic contact would be fitted to either the door/window or frame by using the supplied double sided tape, the magnet would be fitted onto the opposing door, window or frame (using double sided tape & 2 small screws, supplied). They would be fitted so that when the door/window is closed, the two parts would be within 5 mm from each other, when opened a wireless signal is transmitted up to 200 metres (line of sight) back to the Receiver. 

The Battery Powered Wireless Siren & Flashing Strobe is quick & easy to install due to the fact it is battery powered, we would normally recommend fitting it to the front of the property (where it is most visible to neighbours, passing police and potential thieves), for customers with easy access to a power supply we can offer a plug in transformer to power it. It is powered by 4 x D Cell Batteries (supplied), which will last approximately 2 years.

When activated it has twin Sirens supplying 120 Decibel & bright Flashing Strobe Lights, the duration of these can be adjusted between 1 - 10 minutes during installation.

The Siren has other features including:

  • Tamper Protection.
  • Service Mode (allows customers to silence alarm for any service operations, remote control required).
  • Easy to follow installation instructions.

Also supplied is a matching Dummy Siren Box which has built in Flashing LED's powered by 2 x AA batteries (supplied), normally fitted to the rear of the property, some customers will add a third especially when living on a corner plot.

Wireless Remote Control, for arming and disarming your Wireless Smart Alarm, from up to 50 metres away.

 The Remote Control can carry out 5 functions: 

  1. Arm: Fully Arms the Alarm System.
  2. Alert: Turns on the Alert Mode (this only turns on the zones that have been programmed to work as an alert).
  3. Home: This Home Arms the Alarm System, (which excludes the alarm zones been programmed to home, this would typically be PIR's inside the building allowing you to arm the doors, but not the internal PIR's for times when you are inside).
  4. OFF: This will disarm the complete Alarm System.
  5. Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.

The impressive Control Panel has all the features you would expect from a far more expensive Alarm System whilst remaining easy to use and program, ideal for DIY Installations, these include:

  • Built in 130 Decibel Siren (adjustable duration).
  • Back up Battery.
  • User Keypad (used for simple programming and daily operation).
  • Stylish Back Light (very useful coming into a dark room).
  • Adjustable Exit & Entry Durations.
  • Two way Communication for the person being called.
  • 8 Wireless Channels (no limit to the number of alarm detectors that can be used).
  • Can be also used with Remote Controls & Battery Powered Wireless Keypad (up to 99 remote controls can be used).
  • Built in Chime Alert (on any of the 8 wireless channels, easily by turned ON & OFF to suit different times of the day).
  • Pre-record your own personal 20 second message.
  • The Alarm panel can call up to eight key-holders, between 1 & 9 times following an activation.
  • Options for operation are Fully Armed, Home Armed, Alert Mode & OFF. 
  • Built in Low Battery Warning.
 
The Smart Alarm Panel is powered by a plug in 3-pin plug in transformer (no electrician required) and plugs into a telephone extension socket with the cables supplied. 
 
This Smart Wireless Alarm is easy to Program (using built in keypad), easy to Install, and can be operated using Remote Controls, Battery Powered Wireless Keypad or the built in Keypad in the following ways:
  • Full Arm (arms all detectors).
  • Home Arm (arms a selection of detectors, this would normally be perimeter detectors on windows, inside garages etc, designed to be used whilst the owner is still at home).
  • Chime Mode (ideal to be alerted if a front/back door, or gate is opened whilst the alarm is disarmed, this can be easily turned ON/OFF using a remote control or keypads to suit different times of the day).
  • Panic Alarm (this can be activated using the remote controls or keypads, perfect for Security or Medical emergencies).
  • Duress Disarm (in the rare event of being forced to turn the alarm OFF, a secret code can silence the alarm whilst it is still calling key-holders with your own pre-recorded message). 
  • Disarm.
There is no limit to the number of additional Wireless Alarm Detectors that can be added to this Alarm System, you can build the system to suit your exact needs, these include:
  • Additional Door Contacts.
  • Vibration Sensors (ideal for use in Pet environments).
  • External Gate & Doors Contacts.
  • Remote Controls.
  • Battery Powered Wireless Keypads (ideal for locations where multiple users need to access the property, or where carrying a remote control is not practical).
  • Indoor PIR's.
  • Outdoor PIR's.
  • Water Detectors.
  • Smoke Alarm Siren Monitors.
  • Floor Pressure Mats.

An ideal DIY Alarm System which will do everything that is needed from most Alarm Systems without having to pay for an expensive Installation & Service Contract.

We would do our best to program most of the Alarm for you before shipping, this reduces work needed to done by yourself during the installation, we also have technical staff available on the telephone to help you with the installation if required.

If you need help in building a system to suit your exact requirements, please contact us for Friendly, No Obligation Advice !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Wireless Smart Alarm Control Panel & Built in Telephone Dialler.
  • 1 x 3-pin Plug in Transformer (2-pin available upon request) for the Alarm Control Panel.
  • 1 x Telephone Cable.
  • 8 x Magnetic Contacts.
  • 8 x Magnets.
  • 8 x Set of Mounting Screws.
  • 8 x Set of Double Sided Tape.
  • 16 x AAA batteries (for the magnetic contacts).
  • 2 x Remote Controls & Batteries.
  • 1 x Wireless Siren.
  • 4 x D sized Batteries (for the siren).
  • 1 x Dummy Siren Box.

Wireless Alarm Receiver & Telephone Dialler:

  • 8 Channels (no limit to number of alarm detectors can be used on each channel).
  • Can be used with up to 99 Remote Controls & Wireless Keypads.
  • Will contact up to 8 key-holders (between 1 & 9 times, chosen during programming).
  • Message in self-recorded (up to 20 seconds). 
  • Backlight (engages as you press any button).
  • Built in 130 Decibel Siren (duration adjustable between 1 - 6 minutes).
  • Adjustable Exit Delay (10 - 60 seconds).
  • Adjustable Entry Delay (10 - 60 seconds).
  • Low Battery Warning (visual battery guage for the back up battery when power is OFF).
  • Built in Panic Function (can be triggered using Built in Keypad, Remote Control & Wireless Keypad).
  • Duress Function (allows key-holder to turn the alarm partially OFF, telephone dialer remains active).
  • Receiving Telephone can toggle between Listen In & Talk function.  
  • Size of Panel: 190 (w) x 114 (h) x 35 (d) mm.
  • Power Supply: Plug in 3-pin Transformer (2-pin available upon request).
Wireless Door/Window Magnetic Contacts:
  • Frequency: 868 Mhz.
  • Wireless Transmission Distance: 200 metres (line of sight).
  • Power: 2 x AAA batteries (supplied).
  • Distance required in the closed position: 0 - 5mm.
  • Mounting Method: Screws or Double Sided Tape (supplied).
  • Size of Magnetic Contact: 85 x 40 x 15 mm.
  • Size of Magnet; 53 x 14 x 15 mm.
  • Side of Operation of Switch: Both Sides.
  • Battery Life: 1 - 2 years (normal operation, depending on usage).
  • Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).
Remote Controls:
  • 5 modes of Operation 
    • Arm: Fully Arms the Alarm System.
    • Alert: Turns on the Alert Mode (this only turns on the zones that have been programmed to work as an alert).
    • Home: This Home Arms the Alarm System, (which excludes the alarm zones been programmed to home, this would typically be PIR's inside the building allowing you to arm the doors, but not the internal PIR's for times when you are inside).
    • OFF: This will disarm the complete Alarm System.
    • Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.
  • Frequency: 868 Mhz.
  • Power Supply: 1 x 12v Battery (MN27)
  • Size: 58 x 31 x 12 mm.
  • Operating Distance: 50 metres (line of sight).
  • Max Number of Remote Controls Per Alarm System: 99.

 

Battery Powered Wireless Siren:

  • Frequency: 868 Mhz.
  • Tamper Switch: Yes.
  • Flashing Strobes: Yes (during activation).
  • Siren Output: 120 Decibel.
  • Power Supply: 4 x D Cell Batteries (supplied).
  • Battery Life: 2 Years (normal operation).
  • Mains Power: Optional Plug in Transformers.
  • Service Mode: Yes (remote control required).
  • Siren Duration: Adjustable in Installation & Service (1 - 10 minutes).
 
Dummy Siren:
  • Size: 260 (h) x 250 (w) x 50 (d) mm.
  • Colour: Red
  • Mounting Holes: 4