Outdoor PIR & Wireless Smart Alarm & Telephone Dialer.

Smart Wireless Alarm, Built in Auto-Dialler & External PIR

Ultra Secure

005-3830

New

8 Channel Wireless Smart Alarm Control Panel with Built in Telephone Dialler supplied with an External Wireless PIR, which can be used as an Alert, an Alarm and even an Alarm with Built in Telephone Dialler, operates on 868 Mhz.

 

More details

Sorry, Out of Stock !!

£ 110.21

(including vat)
Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

8 Channel Wireless Smart Alarm Control Panel with Built in Telephone Dialler supplied with an External Wireless PIRcan be used as:

  • A basic Outdoor Wireless Alarm.
  • A basic Alarm with built in Telephone Dialler System.
  • A Wireless Driveway Alert.
  • A Wireless Driveway Alert & Alarm Dialler (to suit different times of the day).
  • Or as a base to build a far more comprehensive Wireless Alarm System.

Wireless PIR: 

The weatherproof Outdoor Wireless PIR is supplied with a unique Protective Rubber Hood which results in a narrow detection pattern (ideal for external applications avoiding false alarms from Cats & Foxes when mounted low and in the horizontal position). The front aperture can easily be widened (by using a knife or scissors) should you want a wider detection area.

It has a detection range of 10 - 15 metres and transmission distance back to the control panel of 150 metres (line of sight).

There are two ways to fit this PIR:

  • Approximately 1 - 1.5 metre High (hidden away) in the horizontal position.
  • High up looking towards the ground (experimenting with the angle so that the PIR doesn't detect small ground animals).

There is a built in 3 minute power saving delay (following each activation), but this can be changed to 15 seconds for applications more worried about a time delay than battery life, powered by a single PP3 battery.

The battery will operate for between 6 - 12 months in most applications (depending on number of activations) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for timely battery replacement. 

There is no limit to how many additional PIR's can be added to this system.

Alert:

If you are using the Control Panel as an Alert to monitor your driveway or garden, it will omit a single chime together with activating a latched flashing LED Screen if the PIR is triggered, this flashing LED allows you to know there has been an activation whilst you were away. The screen can be reset by pressing the keypad, but will continue to chime again even if it is still flashing.

Additional PIR's can be added if you want to monitor other locations.

Control Panel & Auto-Dialler:

This impressive Wireless Smart Alarm Control Panel with Built in Telephone Dialler, can contact up to 8 key-holders by telephone with your own 20 second pre-recorded message when activated.

Packed full of features, normally associated with much more expensive Alarm Systems, including:

  • Built in 130 Decibel Siren (adjustable duration).
  • Can be used as an:
    • Wireless Alert.
    • Wireless Alarm.
  • Powered by a Plug in 3-pin Transformer (2-pin available upon request).
  • Back up Battery.
  • User Keypad (used for simple programming and daily operation).
  • Stylish Back Light (very usefull coming into a dark room).
  • Adjustable Exit & Entry Durations.
  • Two way Communication for the person being called.
  • 8 Wireless Channels (no limit to the number of alarm detectors that can be used).
  • Can be also used with Remote Controls & Battery Powered Wireless Keypad (up to 99 remote controls can be used).
  • Built in Chime Alert (on any of the 8 wireless channels, easily by turned ON & OFF to suit different times of the day).
  • Pre-record your own personal 20 second message.
  • The Alarm panel can call up to eight key-holders, between 1 & 9 times following an activation.
  • Options for operation are Fully Armed, Home Armed, Alert Mode & OFF. 
  • Built in Low Battery Warning.
It is very user friendly to program (using built in keypad) and to install, and can be operated using Remote Controls, Battery Powered Wireless Keypad or the built in Keypad in the following ways:
  • Full Arm (arms all detectors).
  • Home Arm (arms a selection of detectors, this would normally be perimeter detectors on windows, inside garages etc, designed to be used whilst the owner is still at home).
  • Chime Mode (ideal to be alerted if a front/back door, outside PIR or gate is opened whilst the alarm is disarmed, this can be easily turned ON/OFF using a remote control or keypads to suit different times of the day).
  • Panic Alarm (this can be activated using the remote controls or keypads, perfect for Security or Medical emergencies).
  • Duress Disarm (in the rare event of being forced to turn the alarm OFF, a secret code can silence the alarm whilst it is still calling key-holders with your own pre-recorded message). 
  • Disarm.

When key-holders are called by the Alarm Control Panel, the recieving telephone can carry out the following proceedures:

  • Listen to the pre-recorded message.
  • Press # (within 10 seconds of the end of the message).
    • Press 1 to listen into the location of the alarm panel.
    • Press 3 to speak through the Alarm Panel.
    • Press # 1 or # 3 to toggle between the listen in & talk features.
    • Press # # to stop the alarm calling other keyholders.
When ## is pressed, the Alarm will turn OFF, but remain fully Armed !!. 
 
A full selection of Alarm Accessories can be added to this system including:
  • External & Internal PIR's.
  • External & Internal Magnetic Door/Window Contacts.
  • Vibration Sensors.
  • Wireless Sirens (battery or transformer).
  • Water Sensors.
  • Floor Pressure Mats.
  • Remote Controls.
  • Battery Wireless Keypads.
  • Smoke Alarm Monitors.
  • Dummy Sirens.

Please contact us if you need advice about building a system for your specific requirements !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Wireless Smart Alarm Control Panel & Built in Telephone Dialler.
  • 1 x 3-pin Plug in Transformer (2-pin available upon request).
  • 1 x Telephone Cable.
  • 1 x PP3 Battery.
  • 1 x Wireless External PIR & Rubber Hood. 
  • 1 x ADSL Splitter.

Control Panel Specification:

  • 8 Channels (no limit to number of alarm detectors can be used on each channel).
  • Can be used with up to 99 Remote Controls & Wireless Keypads.
  • Will contact up to 8 key-holders (between 1 & 9 times, chosen during programming).
  • Message in self-recorded (up to 20 seconds). 
  • Backlight (engages as you press any button).
  • Built in 130 Decibel Siren (duration adjustable between 1 - 6 minutes).
  • Adjustable Exit Delay (10 - 60 seconds).
  • Adjustable Entry Delay (10 - 60 seconds).
  • Low Battery Warning (visual battery guage for the back up battery when power is OFF).
  • Built in Panic Function (can be triggered using Built in Keypad, Remote Control & Wireless Keypad).
  • Duress Function (allows key-holder to turn the alarm partially OFF, telephone dialer remains active).
  • Receiving Telephone can toggle between Listen In & Talk function. 
  • Size of Panel: 190 (w) x 114 (h) x 35 (d) mm.


PIR Specification:

  • Frequency: 868 Mhz.
  • Detection Distance: 10 - 15 metres.
  • External Use: Yes.
  • Detection Angle: Approximately 20 Degrees (with hood) 110 Degrees (without hood).
  • Power Supply: 1 x PP3 Battery.
  • Transmission Range: 150 metres (line of sight).
  • Mounting Method: Adjustable Wall Bracket (using 2 screws).
  • Power Saving: Yes (if set to 3 minutes between activations).
  • Low Battery Warning: Yes (low flashing red LED when the battery is needing replacement