Additional 2B Solar Powered Wireless Perimeter Detector Beams with two sets of Dual Detection Beams, 100 metre Detection & 900 metre Transmission.
This product is no longer in stock
These impressive 2B Solar Powered Wireless Perimeter Beams are packed with impressive features (listed below) and will work in conjunction with either of the Wireless Receivers (indoor 004-2790, 004-2880) & (solar outdoor 004-2810), perfect for protecting the outside of homes, farms & businesses:
The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. There are a pair of detectors on each size of Beam, so these 2B-100 Beams have two pairs whilst 3B-100 would have three pairs, each pair of detectors work independently of each other resulting in the 3B-100 Beams having three chances to detect an Intruder.
The External Beams are also supplied with an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location.
They are very easy to install as they have a built in Red Glow Light (for easy lining up).
These Beams can be set to operate a small siren for a few seconds when activated (pressing ON/OFF button 3 - 6 times, or OFF by pressing the same ON/OFF button 7 or 8 times).
You can use up to 128 sets of Beams with the Internal Receiver & 32 sets with the Solar Wireless Siren, you can mix & match by using a selection of different sizes of Beams within one single system.
The Wireless operating range between the Beams & Receivers is 900 metres (line of sight) which can be doubled by using the signal repeater (part number 004-2910).
Quality Solar Powered Wireless Siren & Strobe works directly with our Long Range Solar Powered Perimeter Alarm Beams (no power required).
Additional Indoor 4 - Channel Wireless Receiver for use with the Solar Powered Perimeter Alarm System, 900 metre working range, Dry Relays and 12 volt Outputs, can operate with up to 128 sets of detectors.
Additional Solar Powered Wireless Perimeter Detector Beams with Dual Detection Technology, 100 metre Detection & 900 metre Transmission.
Additional 3B-100 Solar Powered Wireless Perimeter Detector Beams with two sets of Dual Detection Beams, 100 metre Detection & 900 metre Transmission.
Large Solar Powered, Wireless Balcony Alarm Beams, used to Secure & Protect vulnerable locations including Balconies, Patio Doors & Large Windows (Sorry, Out of Stock !!).
Additional Solar Technology Internal Wireless PIR, battery life increased from 2 years (in low lighting) to up to 5 years (in bright buildings). This PIR has an impressive 400 metres working transmission range.
Solar Technology Internal Wireless Curtain PIR, battery life increased from 2 years (in low lighting) to up to 5 years (in bright buildings). This PIR has an impressive 400 metres working transmission range and specially designed narrow detection pattern.
Additional Solar Technology Wireless Smoke Detector, battery life increased from 2 years (low lighting) to 5 years (light buildings).
Additional Wireless 4 x Channel Receiver (supplied with 2 x Remote Controls) for use with our 900 metre Solar Powered Wireless Perimeter Alarm Systems.
Wireless Repeater or Signal Booster for use with the Solar Powered Perimeter Perimeter Alarms, increases the operating distance between Detectors & Receivers by 900 metres.
Telephone: We are still available in the old fashioned way, give us a call on 01604 589414 or 01604 758438 to talk to a real person, we are happy to give you Friendly, No Obligation advice (lines open 8am to 5.30pm Monday - Thursday, 8am to 5pm Friday).
Email: If you don't have time to call us, then send us an email to email@example.com.
Personal Visit: Some customers find it far easier to come and meet us for a Friendly, No Obligation Consultation (click here for full details).
Easy Programming Method: