Four sets of 3B Solar Wireless Perimeter Security Beams with a KP H/D GSM Auto-Dialler, ideal for protecting your Perimeter, Business or Home, the 3B Beams have an impressive 100 metre detection range & a 900 metres transmission range back to the Wireless Receiver, the GSM Dialler will contact key-holders by Telephone.
This product is no longer in stock
A comprehensive solution to help protect your Perimeter, Business or Home, this Wireless Perimeter Alarm System is supplied with:
Designed for Easy Installation !!
The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:
The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation (allowing small animals, insects, leaves & debris to safely pass by). There are a pair of detectors on each size of Beam, so the 3B-100 have three pairs whilst the 2B-100 would have two and the 1B would have one. Each pair of detectors work independently of each other resulting in the 3B-100 Beams having three chances to detect an Intruder, and creating a larger invisible perimeter.
They also have an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location.
They are very easy to install as they have a built in Red Glow Light (for easy lining up).
These Beams can be set to operate a small siren for a few seconds when activated (pressing ON/OFF button 3 - 6 times, or OFF by pressing the same ON/OFF button 7 times).
You can use up to 128 sets of Beams with this Receiver & 32 sets should you decide to add a Solar Wireless Siren (part number 004-2810).
The KP Heavy Duty GSM Auto-Dialler is constructed with a steel case, ideal for many commercial applications or the harsher environments.
It is connected to the Wireless Receiver by a short length of bell cable (supplied) and communicates through mobile phone networks, a standard sized SIM Card needs to be fitted (you can use either PAYG or Contract).
It is very easy to program by using the built in keypad, and easy to use with the following features:
The secret to using a GSM Auto-Dialler with a Perimeter Alarm is to use the Dialler as the central hub of the system, therefore any additional Sirens, Flashing Lights or Relays would be connected to the output of the Dialler (not the internal receiver), this gives you full control, even from remote locations via your mobile.
The Receiver is used for just two reasons, first to receiver the signal from all of the Detectors, the second as a useful Chime unit for when you are at home and you do not need the system Armed.
You can add many additional accessories to this Perimeter Alarm system to suit your application including:
If you require advice when building your system, please contact us for Friendly, No Obligation Advice !!
Need Advice on choosing the best System for your personal application or Help after you have Purchased one, then please contact
Telephone: We are still available in the old fashioned way, give us a call on 01604 589414 or 01604 758438 to talk to a real person, we are happy to give you Friendly, No Obligation advice (lines open 8am to 6pm Monday - Thursday, 8am to 5pm Friday).
Email: If you don't have time to call us, then send us an email to firstname.lastname@example.org.
Live Chat: If Live Chat suits you better, we are available from 8am to 6pm Monday - Thursday and 8am to 5pm Fridays (see the chat box in the bottom right of the web site).
Personal Visit: Some customers find it far easier to come and meet us for a Friendly, No Obligation Consultation (click here for full details).
Wireless Receiver Specification:
GSM Dialler Specification:
Easy Programming Method: