Smart Wireless Alarm, Built in Telephone Dialler & Vibration Sensor.

8 Channel Smart Wireless Alarm Control Panel with Built in Telephone Dialler supplied with a Wireless Vibration Sensor, can be used as:

• A basic Alarm & Telephone Dialler System.
• A Wireless Entry Chime Alert & Alarm Dialler (to suit different times of the day).
• Or as a base to build a far more comprehensive Wireless Alarm System to suit your exact requirements.

This Alarm would be connected to one of your telephone line extensions (most customers would simple use a plug in splitter) therefore there are no hidden running costs apart from the cost of a call should the alarm make one. It will contact up to 8 key-holders with your own pre-recorded message in the event of an Alarm activation.

Upon receiving a call you can carry out the following actions:  

• Listen to the pre-recorded message.
• Press # (within 10 seconds of the end of the message).
  • Press 1 to listen into the location of the alarm panel.
  • Press 3 to speak through the Alarm Panel.
  • Press # 1 or # 3 to toggle between the listen in & talk features.
  • Press # # to stop the alarm calling other key-holders.

Wireless Alarm & Telephone Dialler Control Panel:

• 1 x Wireless Smart Alarm Control Panel & Built in Telephone Dialler.
• 1 x 3-pin Plug in Transformer (2-pin available upon request).
• 1 x Telephone Cable.
• 1 x PP3 Battery.

Wireless Vibration Sensor:

• 1 x Wireless Transmitter.
• 1 x Shock Sensor.
• 1 x set of mounting screws.
• 1 x mounting double sided tape.
• 2 x AAA batteries.

Wireless Alarm Receiver & Telephone Dialler:

• 8 Channels (no limit to number of alarm detectors can be used on each channel).
• Can be used with up to 99 Remote Controls & Wireless Keypads.
• Will contact up to 8 key-holders (between 1 & 9 times, chosen during programming).
• Message in self-recorded (up to 20 seconds). 
• Backlight (engages as you press any button).
• Built in 130 Decibel Siren (duration adjustable between 1 - 6 minutes).
• Adjustable Exit Delay (10 - 60 seconds).
• Adjustable Entry Delay (10 - 60 seconds).
• Low Battery Warning (visual battery guage for the back up battery when power is OFF).
• Built in Panic Function (can be triggered using Built in Keypad, Remote Control & Wireless Keypad).
• Duress Function (allows key-holder to turn the alarm partially OFF, telephone dialer remains active).
• Receiving Telephone can toggle between Listen In & Talk function.  
• Size of Panel: 190 (w) x 114 (h) x 35 (d) mm.
• Power Supply: Plug in 3-pin Transformer (2-pin available upon request).

Wireless Vibration Sensor:

• Frequency: 868 Mhz.
• Wireless Transmission Distance: 200 metres (line of sight).
• Power: 2 x AAA batteries (supplied).
• Mounting Method: Screws or Double Sided Tape (supplied).
• Size of Transmitter: 85 x 40 x 15 mm.
• Size of Shock Sensor; 35 x 35 x 5 mm.
• Length of Joining Cable: 250 mm (could be lengthened).
• Battery Life: 1 - 2 years (normal operation, depending on usage).
• Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).