WG 'Touch' Alarm Wireless External Curtain PIR
Wireless External Curtain PIR, creates a very narrow detection beam (ideal for locating on balconies, patio doors etc).
For use with the WG 'Touch' Wireless GSM Alarm System.
Recipient :
* Required fields
or Cancel
Wireless External Curtain PIR, creates a very narrow detection beam (ideal for locating on balconies, patio doors etc).
For use with the WG 'Touch' Wireless GSM Alarm System.
This product is no longer in stock
Availability date:
These Wireless External Curtain PIR's, create a very narrow detection beam (ideal for locating on balconies, in front of patio doors, in open outbuildings etc) without expanding away from the location.
Designed to work in conjunction with our WG 'Touch' Wireless GSM Alarm System, they have a 10 metre range, 100 degrees vertical & 10 degress horizontal detection pattern and a wireless range back to the receiver of 80 metres (line of sight).
When mounted vertically, they will creates a very narrow beam (ideal for protecting balcony applications & french doors), when mounted in a horizontal position, they create a wide detection pattern avoiding the ground and ceiling (ideal for buildings prone to small animals).
Being battery powered, they can be very easily installed into any location.
You can use up to 100 alarm detectors with the WG 'Touch' Wireless GSM Alarm System.
Battery Powered Wireless PIR, designed to work in conjunction with our WG 'Touch' Wireless GSM Alarm System
Wireless Magnetic Alarm Contact, works in conjunction with our WG Wireless GSM Alarm Systems, designed to secure & protect windows and doors.
Wireless Curtain PIR, creates a very narrow detection beam (ideal for locating behind patio doors, bay windows etc). For use with all of our KP Wireless Alarm Systems & Alert Watch.
Pet Friendly Wireless PIR, designed to detect animals weighing over 10 KG, ideal for locations with small animals present, can be used with all of our KP Alarm Systems.
Wireless Panic Button, used to trigger the WG Wireless Alarm from up to 100 metres away, in the event of a medical or security incident.
Wireless Gas Detector, will activate the KP & WG Wireless Alarms when Gas is detected.
Battery Powered Wireless PIR, works in conjunction with the WG GSM Wireless Alarm Systems.
This Wireless Magnetic Alarm Contact works in conjunction with our WG Wireless GSM Alarm System's, they will trigger the alarm if the door or window is opened.
Wireless Alarm Float Sensor, designed to detect rising or falling water (depending on how it is used) and can be used with all of the WG Wireless Alarm Systems.
Wireless Damp Sensor & Transmitter, designed to be fitted underneath carpets (or similar locations) and will send a wireless signal back to any WG Wireless GSM Alarm if water is detected.
Special Offer, Remote Control Pack, used to Arm, Disarm or activate the Panic Button, on all of the WG Wireless Alarm Systems.
Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.
How PIR's Work (passive infrared detector):
All PIR sensors detect changes in infra-red radiation, in the form of heat emitted by a number of bodies including people, cars and to a lesser extent, dogs or other small animals. The bigger the body, the more infra-red radiation isemitted and the easier it is for a PIR sensor to detect.
The field of view is the area in which changes in infra-red radiation can be detected. The field of view can alter with changes in temperature and the size of the heat source.
The construction of the PIR and Fresnel Lens divide the field of view into a number of zones both vertically and horizontally.